Unbreakable BeastFPV

First, update the firmware through 10.0.0.1

Then check the targets in 10.0.0.1/hardware.html
Fan enable pin should be 2
If necessary, update by downloading hardware.json

If you don’t give out wi-fi through your menu (not appa)
Open, press the boot button, and connect usb-c to the computer without letting go,
launch ExpressLRS Configurator and flash as NamimnoRC Voyager OLED 900MHz TX
Disable-on, distribute Wi-Fi through your menu, and stitch friendship.
Count to 10, disable-connect, distribute Wi-Fi, and download hardware.json through 10.0.0.1/hardware.html
That’s it.
The Beast750 frequency is also there.